Miracle Box 2.40 Setup - Volcano Box v3.0.9 SetupZ3x Samsung Tool PRO 27.1HWK+UFSx Box Update v2.3.0.7

Samsung E2152 Sim Card Ways Not Working Solution

Samsung GT-E2152 Sim Card Ways Jumper Problem Solution

Here’s the full tracing line paths for repairing Samsung E2152  Insert sim card problem. This solution shows the primary tracks paths for tracing the sim connector pin to the inner part of the circuit component such as the IC(U312)

The solution below shows the Samsung E2152 pin connector connection line paths through to a particular components that holds the SIM card to work. Just refer to the solution to trace each corresponding pin connection for a quick and easy troubleshooting or repair.

MobileRdx.com

Solution Created By:  d-Artigo

You may first check the SIM supply voltage (VSIM) pin and ground pins, then the SIM Clock pin. The SIM Data and the SIM Reset were directly connected to the PEARL IC, tracing this line paths may need to remove the PEARL IC first.You may also try to replace the capacitors and resistors being connected to it.
So, if the three pin such as VSIM, Ground and SIM clock line paths were all both okay.
The last and only option is to rework the pearl IC or replace if necessary if the Samsung E2152 still shows insert SIM card or does not detect the SIM card.

Samsung E2152 Sim Card Jumper, Sim Not Working problem, Inser Sim Solution,Sim Card Ways, Sim Ic Solution,Simcard Ways,

Leave a Reply

Your email address will not be published. Required fields are marked *