Miracle Box 2.40 Setup - Volcano Box v3.0.9 SetupZ3x Samsung Tool PRO 27.1HWK+UFSx Box Update v2.3.0.7

Samsung Star Pro S7262 Power Button Problem Jumper

Samsung GT-S7262 Power Button Ways Problem On-Off Switch Jumper

Here’s the solution to repair Samsung Galaxy Star Pro S7262 power ON/OFF switch problem.
This problem may cause the device unable to power up when hitting the power key. The problem may easily configured if the power ON and OFF switch key has no response, but the device is not totally dead for it shows a charging indication when you charge it up. Now, this solution simply shows the line paths (ON OFF ways)of the power key.

Samsung Galaxy Star Pro S7262 Power Button Ways Problem Jumper

Samsung S7262 Power ON OFF switch Line Paths (ON and OFF ways)
Samsung GT-S7262 power on off switch ways

Hints for repair: when the device will unable to power up when hitting the power key button but it shows charging indication when you plug-in the battery charger, the problem may possibly lies on the power key line paths. But before tracing the line paths, you must see to it that the keypad membrane is perfectly clean and free from dirt, corrosion and oxidation. You can check the power ON/OFF voltage to the inner core of the switch key terminal pads, this voltage may range approximately from 1to 3 volts. If there is no voltage reading you get on that spot, locate and trace the test spots for the power switch, see the picture guide above, it is located just near the keypad LED. Make a continuity check by using a multimeter to those corresponding spots indicated on the picture guide, from the power key pads through to each corresponding component.

Samsung GT- S7262 Power Button Jumper,On Off Switch Ways problem Repair Solution, Power Button Ways,On-Off Key Not Working Problem, Power Key Jumper

Leave a Reply

Your email address will not be published. Required fields are marked *