Miracle Box 2.40 Setup - Volcano Box v3.0.9 SetupZ3x Samsung Tool PRO 27.1HWK+UFSx Box Update v2.3.0.7

Samsung Galaxy Note 3 N7505 Power Button Jumper Ways

Samsung Galaxy Note 3 N7505 Power Button Jumper Ways
Samsung SM-N7505 Power On Off Button Ways

Here’s the jumper ways solution for Samsung Galaxy Note 3 N7505 ON and OFF switch if the handset device showed charging indication when the battery charger is plug-in but unable to power up when the power button is being pressed.

If the keypad flex is working okay and already tried a new replacement but still it won’t power up when the power key is pressed.
The solution below showed the alternative spot where to apply a jumper wire when the power key line paths is cut.

Samsung Galaxy Note 3 N7505 Power Button Jumper Ways

Repair hints for Power Switch problem on Samsung SM-N7505:
1. Check the power switch assembly, if the assembly is damaged replace the switch.
Sometimes even if the powerswitch is not not visually damaged, see to it that it still working by using a
multimeter
2. For lifted button switch solder terminal pads on the PCB board, manage to re-establish the switch to its original position and bond it perfectly so that it won’t easily break. Then manage to reconnect the power switch line paths and the ground connection. If you can see an empty components solder pads just below of it, you can connect it to that spot. that is also connected to the power switch.

Samsung Galaxy Note 3 N7505 Power Button Ways, Samsung SM-N7505 On Off Key Jumper Solution, Set Is Dead Problem
Samsung Galaxy Note 3 N7505 Power Button,Power Key,Power Switch,On Off Button, On Off Switch, Power Problem

Leave a Reply

Your email address will not be published. Required fields are marked *