Samsung GT-S7560 Display White Or Blank Problem Solution

Samsung GT-S7560 Display White Or Blank Problem Solution
Samsung Galaxy Trend S7560 LCD Display IC Solution Jumper Problem Ways LCD Display Not Working
Hang or frozen and white screen can be fix by restoring or flash updating the phones firmware, but sometimes it is cause by a hardware problem issues especially those suffered by wet or water damaged.

Here’ how to troubleshoot the Samsung Galaxy Trend S7560 Display problem:
For quick fix, on minor problem like if the phone status shows no indication of being wet by any liquid, free of oxidation build up or the PCB board is still clean.
– Check the Flex ribbon cable wire.. replace if damaged.
– Check/ try to replace the LCD screen, the white LED’s on it may already been busted.

Just refer to the solution below, this may help in solving backlight white LED problem on Samsung GT-S7560 after you confirmed that the LCD screen is okay or already tried replacing it

Display White Or Blank Solution
Samsung GT-S7560 Display White Or Blank Problem Solution

How to Make a Jumper in the Socket Display
Prepare a cable smooth and adjust the length that we will connect its tracks
Heat Tin with solder for attaching fine wires so that it will closely united.
Use a voltage tester to measure the jumper cables.

Tips & Warning
Make sure the jumper cables are connected properly so that it can deliver a good flow.
Make sure that the jumper cables are not connected directly with the other jumper cable.
The only hint of Mobilerdx on how to make a lane jumper socket on the Samsung GT-S7560. good luck

Samsung S7560,LCD, Display, Solution, Jumper, Problem, Ways
Samsung GT-S7560,LCD Display, Display Problem, Display Solution, Display Jumpers, Display Ways, White Display, Blinking Display, Blank Display

Leave a Reply

Your email address will not be published. Required fields are marked *