Huawei Y6 Pro Charging Problem Solution Charging Ways

Huawei Y6 Pro Charging Problem Jumper Charging Ways

This post serves as your troubleshooting guide in case your Huawei Y6 Pro won’t charge. Whether you are charging with Samsung’s manufacturer charger or a wireless charging pad, charging issues are among the most common problems any Android smartphone owner may face. It is also among the problems that need to be addressed immediately as your phone will only sit atop your table when it totally depletes its battery.

Solution

Before doing, Be sure to check the battery and charger are Exactly working condition. then verify the phone’s USB pin connector is broken or any fault.
Check the charging (+) and (-) line paths are short using a multimeter, if it shows short them, remove/replace the diode, capacitors, and filters. also, replace the fuse. Note: use these work at your own risk.
Check all the components shown in the image below.

Reasons of Problems

The phone could be water damaged.
Dust particles might be present in charging connector.
Your charger might be faulty.
Connection in the phone might be broken.
If you have damaged the Huawei Y6 Pro USB charging connector prints, I have marked charging connector jumper ways in the next diagram. Make jumpers from broken prints to their corresponding components and your phone will hopefully start charging again. Good Luck

Please Note that we will edit these solutions or add new ones if found in this page at any time in the future. So feel free to come back any time on this page to stay up to date.

If you have further questions please don’t hesitate to leave a comment.

Note: Every repairing solution posted here is tested by at least one member of our team. Use the information available here at Your Own Risk. We are not responsible if any harm comes to your device during the repairing process.
Huawei Y6 Pro Charging Solution Jumper Problem Ways No Charging Not Supported
Huawei Y6 Pro Charging Problem, Charging Solution, Charging Jumpers, Charging Ways