Close Menu
MobileRdx
    Facebook X (Twitter) Instagram
    MobileRdxMobileRdx
    • Hardware
      • Samsung
      • Xiaomi Hardware
      • Huawei Hardware
      • Oppo Hardware
      • Vivo Hardware
    • Box Setup
      • UnlockTool Setup
      • TFT Unlock Tool
      • UFI Box
      • Easy Jtag Plus Box
      • Infinity CM2
      • Z3x Box Samsung Tool PRO
      • Miracle Box
    • GsmTools
    • Contact Us
    • Privacy Policy
    |
    MobileRdx
    Samsung

    Samsung Galaxy J7 Prime Backlight Ways Display Jumper Solution

    By Mobile RdxApril 30, 2017

    Samsung Galaxy J7 Prime Backlight Ways Display Jumper Solution
    Samsung G610F Display Problem Light Ways Solution Jumper

    In Samsung Galaxy J7 Prime G610F Display has connected the motherboard with a cable connector. If your LCD is not working, you obviously have to check if a faulty LCD is not causing this problem. If the LCD is okay then check the LCD connector.

    If you ever already been tried to replace a new replacement LCD screen and new flex cable wire and nothing happens but the display problem still exists like black screen display, blue screen display, white screen display, garbled and saturated screen display.
    Before you may proceed, you need to make sure first that the flex cable and the LCD are working fine or you have it tried with new replacement installed but nothing happens.
    Note: this solution covers only for hardware repair and may not help on software related issues.

    Hardware Solution:

    Samsung Galaxy J7 Prime Backlight Ways Display Jumper Solution

    – Check the display pin connector, clean it, rework or re-solder it if necessary.
    – Check the capacitors and coils, replace if necessary, and then check the VBAT voltage and the VIO voltage on it. Those are the supply voltages for the display
    – Check the two DSI line choke filters

    – If those parts above already checked and seems nothing wrong, the problem possibly exists on the Display UI chip. Reworking or replacing it will only fix the display problem

    For damaged or lifted display pin connector or due to wet or water damaged, here’s the tracing guide if you might think that the problem lies on a broken display signal line paths.

    Read More:-  Samsung E1205T Short Problem Repair Solution

    Samsung Galaxy J7 Prime Full Lcd Display Connecter Jumper

    If you have further questions please don’t hesitate to leave a comment.

    Note: Every repairing solution posted here is tested by at least one member of our team. Use the information available here at Your Own Risk. We are not responsible if any harm comes to your device during the repairing process.

    Samsung Galaxy J7 Prime LCD, Display, Solution, Jumper, Problem, Ways
    Samsung G610F Backlight Ways Light IC Solution Jumper Problem Ways LCD Display Light Not Working

    Related Posts

    Samsung Galaxy A04s Charging Paused Solution | Battery Temperature Error

    Samsung Galaxy A15 SM-A156 Charging Ways | Not Charging Problem

    Samsung Galaxy A05s Charging Ways | Repair Not Charging Problem

    Add A Comment
    Leave A Reply Cancel Reply

    All Box Latest Setup
    UnlockTool V2025.04.30.0
    UMT Tool Setup QCFire (v11.8)
    TFT Unlock Tool v6.2.1.1 – Free
    Android Utility Pro V177.00.6777
    EFT Dongle V5.0.2 Setup
    Z3x Box Samsung Setup V45.14
    Hydra Tool Setup V6.0
    Miracle Box Latest Setup V3.43
    Infinity CM2 Latest Setup
    Facebook X (Twitter) Instagram Pinterest
    • About Us
    • Contact Us
    • Privacy Policy
    © 2025 MobileRdx. Made with ❤️ in India

    Type above and press Enter to search. Press Esc to cancel.