Repair Redmi 5A Touch Screen Not Working Problem Touch Ways
Xiaomi Redmi 5A Touch Screen Connector Problem Jumper Solution Ways Touch Solution Touch Not Working
If ever trying to fix Redmi 5A Touch Screen failure issues and you’ll do replacing the touch plate module, trying to calibrate the touchscreen setting but unresponsive and restoring, upgrading and flashing the device firmware but nothing happens, the problem still exists and the touch screen left unresponsive.
This sometimes happens if the device suffered due to a wet damaged, heavily dropped and any related damaged accidentally done by the user. In this case, only a hardware repair may only help solve the problem.
This solution below shows the Xiaomi Redmi 5A PCB board components that hold and control the touch screen panel to work.
Hardware Solution
Here is the hardware solution for Redmi 5A touch screen problem:
Unplug and plug touchscreen strip and check.
Plug-in any other good Touch Screen and Check. This step is to verify whether the problem is in hardware or Redmi 5A touch screen is faulty.
If the problem is in hardware then clean touch on board connector and check.
Gently heat surrounding components of touch screen and check.
Re-solder each pin of touch connector and check.
Xiaomi Redmi 5A Touch Screen Ways Problem Jumper
Please Note that we will edit these solutions or add new ones if found in this page at any time in the future. So feel free to come back any time on this page to stay up to date.
If you have further questions please don’t hesitate to leave a comment.
Note: Every repairing solution posted here is tested by at least one member of our team. Use the information available here at Your Own Risk. We are not responsible if any harm comes to your device during the repairing process.
Xiaomi Redmi 5A Touchscreen, Touch Problem, Touch Solution, Touch Screen Ways, Touch Screen Jumpers
