Nokia 105 TA-1010 Power Key Ways On-Off Key Jumper Solution

Nokia 105 TA-1010 Power Key Ways On-Off Key Jumper Solution
Nokia 105 2017 Power Button Jumper On-Off Button Ways Solution Power Button Not Working Problem

One of the common issues plaguing Nokia 105 TA-1010 owners is the inability of the device to turn itself on from time to time. This issue can be due to a few factors and can manifest itself in a few different ways. Below are some of them.

Here’s the jumper ways solution for Nokia 105 TA-1010 ON and OFF switch if the handset device showed charging indication when the battery charger is a plug-in but unable to power up when the power button is being pressed.

Besides that, a problem in power button might also cause your phone to restart at times, which becomes very much annoying and it troubles you to the masses.

In the following lines you will get to know about Nokia 105 TA-1010 power button problems as well as their solutions:

Workaround

For Nokia 105 TA-1010 power button problem there is no workaround method, however, you can try using a pin and move it all around the Nokia 105  power button, as this might be able to take away some stiffness from your power button.

Nokia 105 TA-1010 Power Switch Hardware Solution

The two upper or legs of the power switch are connected to the PCB’s ground lines.
The other two which is in lower is the power switch line paths, just locate the test spots as shown on the solution above where to apply a jumper to reconnect its connection.

If you have further questions please don’t hesitate to leave a comment.
Note: Every repairing solution posted here is tested by at least one member of our team. Use the information available here at Your Own Risk. We are not responsible if any harm comes to your device during the repairing process.