Close Menu
MobileRdx
    Facebook X (Twitter) Instagram
    MobileRdxMobileRdx
    • Hardware
      • Samsung
      • Xiaomi Hardware
      • Huawei Hardware
      • Oppo Hardware
      • Vivo Hardware
    • Box Setup
      • UnlockTool Setup
      • TFT Unlock Tool
      • UFI Box
      • Easy Jtag Plus Box
      • Infinity CM2
      • Z3x Box Samsung Tool PRO
      • Miracle Box
    • GsmTools
    • Contact Us
    • Privacy Policy
    |
    MobileRdx
    Test Point EDL 9008 Mode

    Nokia 2.1 TA-1084 Test Point Boot Into Edl 9008 Mode

    By Mobile RdxFebruary 20, 2019

    Nokia 2.1 TA-1084 Test Point Boot Into Edl 9008 Mode

    Nokia 2.1 TA-1084 Pinout Test Points Boot Into Edl 9008 Mode

    As you know on Nokia 2.1 TA-1084 you will not able to enter to edl mode neither using edl USB Cable nor using the EDL command or options. So the question is how you can enter or boot to edl mode on Nokia 2.1? and you are at right place to know and understand the complete process to use edl mode on Nokia 2.1 TA-1084. To use edl mode on this model, you just need to identify the EDL test point on the motherboard of the phone, if you find the correct test point then just connect these 2 points and you are done, and the phone will now detect on your computer. Now you can easily flash firmware on your Mi phone and also you can remove mi account of the phone.

    EDL mode is a Qualcomm enabled feature, that is useful to unbrick device, unlock bootloader or modify protected device parameters. However, not all Qualcomm based device support it.

    Why We Need Nokia 2.1 TA-1084 Test Point:

    If you are newbie user then probably EDL mode may be new word for you. But if you are involved in rooting and flashing firmware then absolutely not.

    In short, EDL mode is also known as emergency mode for mobile. Technically all the Huawei devices come with EDL mode option. If you want to install or update your own Nokia 2.1 TA-1084 phone then you have many options to flash new stock ROM on the device using Recovery Mode or using fastboot mode. Both methods have some limitations like Recovery ROM can be used only to update higher version and you can’t downgrade Huawei version.

    Read More:-  Redmi Note 7 Test Point EDL (9008) Mode

    Nokia 2.1 TA-1084 Test Point EDL Mode:

    Nokia 2.1 TA 1084 Test Point Boot Into Edl 9008 Mode

    Power off the device if possible.

    Open back cover of dead Nokia 2.1 TA-1084. [You may do Google to tear down Huawei Y7 Prime.

    [Be careful at the time of removing back cover of the device and make sure you are not going to damage any hardware of the device]

    Once you are able to remove back cover, disconnect the batter connector first. Battery not required for EDL mode.

    Uses Of Nokia 2.1 TA-1084 Prime Test Points

    • Install stock ROM on Nokia 2.1 TA-1084
    • Flash Nokia 2.1 without unlock bootloader. Bootloader unlocking permission not required.
    • Recovery dead RedNokia 2.1 TA-1084 flashing firmware.
    • Install stock ROM easily, if the device is not able to boot into fastboot mode or device stuck on Huawei Logo.

    Related Posts

    Xiaomi Redmi A4 EDL Test Point | Reboot to EDL Mode 9008

    Vivo Y35 PD2225F EDL Test Point | Reboot to EDL Mode 9008

    Xiaomi POCO X6 5G Test Point – Reboot to EDL Mode 9008

    Add A Comment
    Leave A Reply Cancel Reply

    All Box Latest Setup
    UnlockTool V2025.04.30.0
    UMT Tool Setup QCFire (v11.8)
    TFT Unlock Tool v6.2.1.1 – Free
    Android Utility Pro V177.00.6777
    EFT Dongle V5.0.2 Setup
    Z3x Box Samsung Setup V45.14
    Hydra Tool Setup V6.0
    Miracle Box Latest Setup V3.43
    Infinity CM2 Latest Setup
    Facebook X (Twitter) Instagram Pinterest
    • About Us
    • Contact Us
    • Privacy Policy
    © 2025 MobileRdx. Made with โค๏ธ in India

    Type above and press Enter to search. Press Esc to cancel.