Download Xiaomi Redmi 8 QCN File For IMEI Repair | Fix Baseband
Here is a download link for Redmi 8 QCN file Many Redmi 8 users reported that their Redmi 8 is showing no network after firmware flashing. If you are also one of them who are getting no network on Redmi 8 then check your IMEI by *#06# code.
If you are searching for the Xiaomi Redmi 8 QCN file for repair IMEI and unknown baseband problem? If yes then you have landed on the right place. Today we will share you Redmi 8 QCN File. Do you have to use QPST to back up QCN? In this sophisticated era, you can use another tool to do it. There are too many tools you can use to back up the EFS partition to be a QCN file. All of them work similarly, so in this post, I only introduced one software called QPST.
To fix invalid IMEI on Redmi 8, we are adding the working QCN file for Redmi 8 with IMEI repair tutorial. Simply follow the tutorial as it is as shown below and restore original IMEI on Redmi 7A within a few steps. No need to use any professional tool to repair IMEI in Xiaomi Mi 8 mobile. Let’s see “how to solve the invalid IMEI problem in Redmi 7Awithout box?”
Xiaomi Redmi 8 Qcn File For
1. No service problem fix.
2. Imei problem fix.
3. Network unlock problem fix.
4. After flash no service fix.
Download Redmi 8 QCN File, and Other Files
Redmi 8 QCN File QCN IMEI Rebuild Tool QPST Tool
Step01 : Generate QCN File For Redmi 7A Mobile
Run “Rebuilder tool” on pc >> “Open File” >> Browse “Mi8QCn File” >>> “Replace IMEI with original IMEI Number” >> Click “Rebuild” button and save new QCN file on pc. 
Step02 Write Or Repair Redmi 7A IMEI Number
- Download QCN Rebuilder and QCN File From above
- Run QCN Rebuilder Load Download QCN Replace IMEI With the Original IMEI then Rebuild QCN
- Enable USB Debugging From Developer options Connect Phone to PC using USB then Enable Qualcomm USB diag port (using below code over adb)
adb devices su setprop sys.usb.config rndis,diag,adb- Note: if the Phone is Not Rooted Then use EDL and BOX Like UMT
- Or just Dial This Number With Dialer to enable Diag. * #9090#, *#*#13491#*#*, *#*#717717#*#*
- Launch QPST Software Downloaded Tool from above.
- Click on the Restore Tab.
- Choose Your Phone By Clicking on First Browse.. Button.
- Select Rebuild QCN File ***.xqcn file [Downloaded From above].
- Now Hit the Start Button.
- Done.
