Miracle Box 2.40 Setup - Volcano Box v3.0.9 SetupZ3x Samsung Tool PRO 27.1HWK+UFSx Box Update v2.3.0.7

Nokia Asha 302 Keypad Ic Jumper Solution Problem Ways

Nokia 302 Keypad Ic Jumper Problem

This solution covers for hardware level of repair for Nokia Asha 302 Keypad Problem and Also you will find Nokia Asha 302 Keypad Ways and Jumpers information in the diagrams in this article.

Just see the solution preview below for it shows which components needs to be check and replace if the there is No Keypad Working on phone or Keypad problem of the Nokia 302 goes wrong.

This solution may help if you already done a software calibration method and tried replacing the Keypad membrane but the problem continues.

Do these solutions step by step.

This solution may help for a water or wet damaged and accidentally, heavily dropped phones.

The Problem occur because of faulty Keypad membrane or bad it’s connection to the Mobile Phone’s PCBA Motherboard.

You Can Use any cleaning liquid for this purpose like CTC or any other you prefer.

Please Note that we will edit these solutions or add new ones if found in this page at any time in the future.So feel free to come back any time on this page to stay up to date.

Here is the Solution for Nokia 302 Keypad Problem Ways.
Nokia Asha 302 Keypad Iv Jumper Solution

Nokia Asha 302 Keypad Ic Jumper
OR

Nokia 302 Keypad Not Working Solution

Hints to fix Nokia Asha 302 Keypad Problem Repair Solution:

Check/clean the keypad PCB matrix.
Clean/replace the keypad membrane..
Remove the EMIF07-LCD02F3 Keypad IC(Marked in above image) and Make Jumper.

Note: Please note that even though every solution posted on our website is tested by one or more members of our team before posting, but still we do not take any responsibility for any damage it may cause to your cell phones. Use these repairing solutions at your own risk. Thank You

www.MobileRdx.com

Leave a Reply

Your email address will not be published. Required fields are marked *