Sony Xperia Z2 D6502-D6503 Charging Problem Repair Solution

Sony Xperia Z2 D6502-D6503 Charging Problem Repair Solution Usb Jumper Ways
Sony D6502 Charging Problem Solution Ways Jumper
In this post, we are going to fix Sony D6502-D6503 charging problem. Not charging problem or it shows no charging indication when the battery charger is plug-in. The solution below shows the charging connection line paths which can be used for easy troubleshooting or repair the Sony Xperia Z2 D6502-D6503 charging problem.

Sony Xperia Z2 is a high-end Android smartphone equipped with a 5.2-inch beautiful display. Besides Full HD resolution, the display also comes with Sony’s advanced technologies X-Reality Engine and Triluminos Display. Its capacitive multi-touch supports up to 10 fingers. No need to doubt that quad-core 2.3 GHz Snapdragon 801 MSM8974AB with Adreno 330 GPU delivers powerful performance. It’s also helped by 3 GB RAM for better multitasking experience. Internal storage capacity is 16 GB, added wtih microSD slot supporting up to 64 GB.

There may be several reasons behind this problem such as: faulty USB charging cable, loose connection in power, damaged or bent charging port on the phone, etc. So you need to check all of them one by one.

Hardware Solution

If the charging is slow then all you have to do is to check with any other Nokia charger, but you have to make sure that the charger is original, as slow charging issues almost always occurs with phones using 3rd party chargers.
Clean battery charging pins and check.
Clean charging connector pins.

If you have any further Questions please leave a message or Chat with us.

Keep in mind:- The every solutions posted on Our website is well tested before by our specialist team, But still we do not take any responsibility for any damage it may cause to your cell phone. Use these repairing solutions at your own Risk, Thank you.

Sony Xperia Z2 D6502-D6503  Charging Ways.Jumper,Charge Problem Repair, Charging Solution,Not Charging

Leave a Reply

Your email address will not be published. Required fields are marked *