Nokia 701 Touchscreen Connecter Ways Solution Repair

Nokia 701 Touch Screen Jumper Solution
Nokia 701 Touchscreen Not Working Problem

If you are looking and having trouble finding where to put a jumper if the touchscreen pin connector is already gone or lifted due to water water damaged on Nokia 701. This solution might help you to ease out your hard time finding where to solder a jumper wire on it just to fix a touchscreen not working problem.

Let’s have a look at Nokia 701 touch screen problem and its step by step solution.

Touch not responding
Slow Response.

Hardware Solution
Here is the hardware solution of Nokia 701 touch screen problem:
Unplug and plug touch screen strip and check.

Plug-in any other good Touch Screen and Check. This step is to verify whether the problem is in hardware or Nokia 701 touch screen is faulty.

If the problem is in hardware then clean touch on board connector and check.
Gently heat surrounding components of touch screen and check.
Re-solder each pin of touch connector and check.

If same problem check Touch screen track ways marked in below image

Nokia 701 Touch screen ways Problem Solution

nokia 2B701 2Btoucscreen 2Bways 2Bconnecter 2Bjumper 2Bsolution
Nokia 701 Touch Solution
Nokia 701 Touchscreen Ways Jumper Line Track

If any Track ways is missing make a jumper with jumper wire.

All the above methods will surely solve your problem, but make sure that you check the status of your Touch Screen after every step you perform, as it might be able to solve that problem.
If you have further Questions please leave a comment.

Read More:-  Nokia X7 Battery Connector Track Ways
Leave A Reply

Your email address will not be published.