Samsung Grand Neo I9060 Charging Ways Problem Solution
Samsung GT-I9060 Charging Ways Jmper Problem Solution
Here’s the Samsung Grand Neo I9060 Solution for Not Charging Problem on the USB pin connector. This may help if the phone suffered wet damaged and resulted to no charging indication when the wall charger is plug-in.
Reasons of Problems
Phone could be water damaged.
Dust particles might be present in charging connector.
Your Samsung I9060 charger might be faulty.
Connection in the phone might be broken.
Phone is encountered any physical damage.
Any of the capacitors might be faulty.
Charging IC might be faulty.
Before proceeding, ensure that the battery and the battery charger are in good working condition.
– Check all the components shown on the image below, you may start by checking the USB pin connector.
– Then the fuse, diode, capacitors and filter coil for possible open or short circuit.
– Trace each of the connection line paths from USB pins down to the components where it is directly connected.
In troubleshooting such charger not supported problem, you may first try to use another wall charger and also try another working battery. Then proceed to hardware troubleshooting if the battery and the charger were both working well. In Nokia phone circuit design, there is a certain components that holds like a battery temperature indicator, and when damaged due by water or oxidation build ups, it will result to a charger not supported error message.
Samsung Grand Neo I9060 Charging Problem Solution, Usb Connecter Ways, Not Charging Fault.
If you have further Questions please leave a comment.
Note: Please note that even though every solution posted on our website is tested by one or more members of our team before posting, but still we do not take any responsibility for any damage it may cause to your cell phones. Use these repairing solutions at your own risk. Thank You.