Repair Samsung Galaxy Star S5282 No Light On Display Lcd
If encountered troubleshooting display problem on Samsung Galaxy Star S5282 slider like blue screen, white screen, blank or empty screen displays.You must first try to install a new replacement LCD screen module of Samsung S5282
and also try to restore or update the flash firmware.
If the above procedures does not fix the display problem on Samsung GT-S5282. Refer to the solution below for it shows a quick guide to finding certain components on Samsung Galaxy Star S5282 that might cause the problem.
Samsung GT-S5282 LCD Screen Display Problem Solution
Samsung S5282 display jumper ways solution tracks
Check the pin connector assembly and ensure to clean it as well.
Check the display filter resistors including the LCD supply voltage and trace the connection tracks to the LCD pin connector. Replace the damaged resistor or mend to reconnect if there is an open line paths.
Check the LCD for possible damaged, cracked or broken. Replace if necessary.
Check the device firmware, and do a self-test and calibration method. update or flash the firmware if necessary it latest firmware version.
Check the LCD pin connector for possible damaged. Clean, re-solder or replace if necessary.
Repair Samsung Galaxy Star S5282 No Light On Display Lcd,Blank Or White Display Problem Repair, White Lcd Solution
Now Check Continuity between Display connector to the resistor compounds. if any of then is track missing then make a jumper.
If the above procedures don’t fix the problem the possible faulty is the main engine IC. Try to re-heat or rework it.
If you have further Questions please leave a comment.
Note: Please note that even though every solution posted on our website is tested by one or more members of our team before posting, but still we do not take any responsibility for any damage it may cause to your cell phones. Use these repairing solutions at your own risk. Thank You.