Samsung Galaxy S6 Edge G925F Touch Screen Ways Solution
Samsung Galaxy S6 Edge G925F Touch Screen Ways Solution Ic Jumper
Repair Samsung Galaxy S6 Edge G925F Touch Screen Problem If ever trying to fix Samsung 9205 touch screen failure issues and you’ll do replacing the touch plate module, trying to calibrate the touch screen setting but unresponsive and restoring, upgrading and flashing the device firmware but nothing happens, the problem still exist and the touch screen left unresponsive.
This sometimes happens if the device suffered due to a wet damaged, heavily dropped and any related damaged accidentally done by the user. In this case only a hardware repair may only help solved the problem.
This solution below show the Samsung Galaxy S6 Edge G925F PCB board components that holds and control the touch screen panel to work.
Samsung Galaxy S6 Edge SM-G925F Touch Screen Failure Solution
If you have further questions please don’t hesitate to leave a comment.
Note: Every repairing solution posted here is tested by at least one member of our team. Use the information available here at Your Own Risk. We are not responsible if any harm comes to your device during the repairing process.
The solution we provide is the solution for hardware troubleshooting on Samsung G925F touch screen problem. This will help for wet or water damaged Samsung SM-G925F touch and type that result to touch screen malfunction.
Just refer to the solution above and do some check up on the highlighted components.
Samsung Galaxy S6 Edge G925F Touch Screen, Touch Problem, Touch Solution, Touch Screen Ways, Touch Screen Jumpers