Nokia 105 TA-1010 Display Ways White Lcd Problem Solution
New Nokia 105 Display Problem Light Ways Solution Backlight Ways Blank Display Problem Full Lcd Ways
In Nokia 105 TA-1010 Display has connected the motherboard with a cable connector. If your LCD is not working, you obviously have to check if a faulty LCD is not causing this problem. If the LCD is okay then check the LCD connector.
If you ever already been tried to replace a new replacement LCD screen and new flex cable wire and nothing happens but the display problem still exists like black screen display, blue screen display, white screen display, garbled and saturated screen display.
Before you may proceed, you need to make sure first that the flex cable and the LCD are working fine or you have it tried with new replacement installed but nothing happens.
Note: this solution covers only for hardware repair and may not help on software related issues.
– Check the display pin connector, clean it, rework or re-solder it if necessary.
– Check the capacitors and coils, replace if necessary, and then check the VBAT voltage and the VIO voltage on it. Those are the supply voltages for the display
– Check the two DSI line choke filters
– If those parts above already checked and seems nothing wrong, the problem possibly exists on the Display UI chip. Reworking or replacing it will only fix the display problem
For damaged or lifted display pin connector or due to wet or water damaged, here’s the tracing guide if you might think that the problem lies on a broken display signal line paths.
Nokia 105 TA-1010 Full Lcd Display Connecter Jumper
If you have further questions please don’t hesitate to leave a comment.
Note: Every repairing solution posted here is tested by at least one member of our team. Use the information available here at Your Own Risk. We are not responsible if any harm comes to your device during the repairing process.
Nokia 105 1010 LCD, Display, Solution, Jumper, Problem, Ways
Nokia 105 Backlight Ways Light IC Solution Jumper Problem Ways LCD Display Light Not Working