Samsung Galaxy J7 J700F Memory Card Problem Repair Solution

Samsung Galaxy J7 J700F Memory Card Problem Repair Solution
Samsung SM-J700F MMC Solution Memory Card Ways Memory Not Detected Problem MMC Jumper Memory Card Ways

It seems the same problem exists in Samsung Galaxy J7 J700F as well with the MicroSD card. I heard the same issue from many of my users, and even they lose some of their best photos due to Samsung SM-J700F Corrupted MicroSD Card. One of them is having 64 GB SanDisk MicroSD card, and he usually uses that to save the music and photos. Although it seems to be no problem with the apps stored on the external memory.

Tips and tricks fix Samsung Galaxy J7 J700F can not detect MMC / SD Card, there are several factors that make Samsung G360Fcan not detect MMC / SD card. The first could be because you are installing the MMC / SD car d is less exact in place so that the Samsung Galaxy J7 you can not detect the MMC / SD card. Factors which could be due to connector MMC / SD Card problematic not detect MMC / SD card. And third, there could be a path MMC / SD card that dropped out of the path, so Samsung G360F are unable to detect MMC / SD card.

Of the that they mentioned above, from the first issue, you ought to carefully in advance the way you install the MMC / SD card, you try to escape the MMC / SD card and replace the MMC / SD card, or you replace the MMC / SD card is new. The second you try to do the replacement SD card connector positive if the connector MMC / SD card J700F Tablets in trouble, before doing the replacement connector MMC / SD card you try to do the check connector MMC / SD card first, positive in case you do any direct issue replacement connector MMC / SD card Samsung Galaxy J7 J700F.

READ MORE:-  Samsung Gio S5660 Charging Usb Repair Ways Solution

Hardware Solution:

Samsung Galaxy J7 J700F Memory Card Problem Repair Solution

Hints in troubleshooting Samsung Galaxy J7 J700F memory card not detected the problem:

1. Try to use another working microSD card.
2. Clean the MMC slot and the flex pin connector.
3. Check/replace the Flex ribbon cable assembly, Or apply a jumper wire for remedy.
4. Check/replace the resistor on the Flex
5. Check/read the VMEM voltage.
6. If all the above procedures don’t help…
Try to flash update the device firmware…

Please Note that we will edit these solutions or add new ones if found in this page at any time in the future. So feel free to come back any time on this page to stay up to date.

If you have further questions please don’t hesitate to leave a comment.
Note: Every repairing solution posted here is tested by at least one member of our team. Use the information available here at Your Own Risk. We are not responsible if any harm comes to your device during the repairing process.
Samsung Galaxy J7 J700F MMC Problem, MMC Solution, Memory Card Jumpers, Memory Card Ways, Memory card Problems

You might also like

Leave A Reply

Your email address will not be published.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More

Share
Tweet
Pin
+1
0 Shares