Realme C1 RMX1811 EMMC Pinout – Remove FRP And User Lock
Hello, mobile technician here’s the Realme C1 ISP (EMMC) pinout for flashing Realme 5 remove User Lock And Pattern Lock Bypass Frp Lock and also you can use this isp pinout.
Realme C1 RMX1811 can be used to overcome some software problems on Realme C1 phone, to direct it you can use a flasher box that has direct isp feature support and usually the flasher box can also be used for repairing emmc like Easy Jtag, Ufi, etc.
What is eMMC?
The term eMMC is short for “embedded Multi-Media Controller” and refers to a package consisting of both flash memory and a flash memory controller integrated on the same silicon die. The eMMC solution consists of at least three components – the MMC (multimedia card) interface, the flash memory, and the flash memory controller – and is offered in an industry-standard BGA package.
Usage of Realme C1 ISP Pinout :
Read/Write EMMC via ISP.
Read/Write EMMC via direct connect (EMMC installed in socket).
One click boot repair via direct emmc connection.
Read MMC info (Many usefull info there such as read/write counter, error counter, etc)
Factory EMMC formatting.
Low EMMC formatting.
Master/Slave partition activation
EMMC smart repartition.
EMMC partition cloning.
Before removing or replacing IC eMMC you should do Direct eMMC first, still, discuss a little about and pinch, it turns out the partitions don’t match. for eMMC, use KMKJS, use the new boss, don’t use the 2nd one, what is 2nd, 2nd is the second boss of the former emmc who died or asks for TP because of the UFI BOX there support TP eMMC Samsung brand we can’t mention one by one because there are many from that by the eMMC owner the TP was revived and sold at a cheap price.
Realme C1 ISP EMMC Pinout:
Okay, just follow this Direct eMMC Realme C1 ISP Pinout, please download
Connections Of the points on the chip, the ones of interest to us are:
DAT0 (Data transfer BiDirectional Line)
CMD (Commands transfer BiDirectionl Line )
CLK ( Clock Lane)
Vcc ( eMMC Core Power usually 2.85V )
VccQ ( eMMC IO Power usually 1.8V )
Vss (Commonly known as GND)
Realme C1 FRP And User Lock Remove Using AE-Tool.
Realme C1 latest Security Patch Not Possible With USB Cable With Any Box/Dongle Or Tp Point
Finally, Userlock+Frp Remove Done Via Isp Connection With Ae-tool.
So that later when you want to direct again you are not confused looking for the Direct Pin, please boss just save it on HDD boss so that at any time there are cases that can be used again, congratulations, try the boss. one, please jumper for VCC VCCQ CLK CMD D0 GND for GND or ground don’t forget the jumpers are also bosses, otherwise, the jumpers don’t connect later.
Clear User Lock, you can try using the ISP method via UFI eMMC ToolBox, use “Factory Reset” under Special Task in User Partition Tab. Or using AETOOL by MRTkey (Android Emmc Tool)