Are you a mobile technician instead of Vivo Y200e 5G charging/charging issues? Well, this post is a full troubleshooting guide & a jumper fix at the motherboard level with reference images for repair technicians.
In many cases, charging problems in Vivo Y02 are caused by loose connections, broken jumper lines, or physical damage to the USB charging port. Check each hardware part and apply the correct jumper solution; you can bring the device back to normal functioning without changing the sub-board.
Reasons Why Vivo Y200e Is Not Charging
- Physical damage to charging ports or carbon/dust build-up
- The charging connector/board is loose or broken
- The charging cable or adapter is faulty
- The battery is swollen or has failed
- Software crash or system update issues
- Liquid damage is causing the failure of PCB tracks
How To Repair the Vivo Y200e Not Charging Problem:
- First, disassemble the Vivo Y200e
- Check the charging sub-board and the motherboard connection.
- You can identify a scratch or a broken line on the sub-board in the bottom-left corner of the picture.
- Form a jumper wire between the sub-board (charger port region) and the correct location of the main motherboard using the directions in the image.
- Employ flux and micro-soldering equipment in order to prevent additional harm.
- Resassemble the device and check the charging operation..
Red line: Route for jumper wire to re-establish the interrupted circuit.
Check all parts and tracks carefully, as shown in the Vivo Y200e diagram, for any indication of corrosion, carbon debris, water damage, or malfunctioning parts. Take extra caution when replacing a motherboard if any parts are damaged. Make proper use of jumpers for missing tracks.
Check out our website for the latest solutions and tips, along with more details on this problem and creative fixes. Content will be put there when it becomes available. Explore the related posts below for more information about mobile phone issues.
