LG P925 Power Button Ways Problem Repair Jumper Solution
For some reason the power switch terminal solder pads may also been severely damaged and lifted by the users., In order to fix this problem we need to bond the power switch to its original position so that it won’t easily break. But the problem is, we cannot apply a solder on its terminal because the solder pads was already been lifted. To avoid hassle digging the PCB board you can refer to this solution below to locate which particular components where we can apply and mend a jumper wire to reconnect the said open line path of the power switch connection.
Check power switch connection line paths accross to each components where it is being connected.
Locate the 10K resistor as shown on the solution above. the other side of that resistor is connected to the battery supply voltage and the other side is for the power switch line path
LG P925 Power Button Ways, On Off Key Jumper, Charging Ok but Phone Is Dead,On Off Key Ways Problem, Lg Thrill P925 Power Button Ways
