Nokia 305 Touch Screen Repair Ways Solution

If you are looking and having trouble finding where to put a jumper if the touchscreen pin connector is already gone or lifted due to water water damaged on Nokia Asha 305. This solution might help you to ease out your hard time finding where to solder a jumper wire on it just to fix a touchscreen not working problem.
Nokia 305 Touchscreen Ways Jumper
Nokia Asha 305 Touch Screen Not Working Problem
Nokia 305 Touchscreen Problem Teseted Solution

Let’s have a look at Nokia 305 touch screen problem and its step by step solution.

Touch not responding
Slow Response.

Hardware Solution

nokia asha 305 touch screen ways solution

Here is the hardware solution of Nokia Asha 305 touch screen problem:

Unplug and plug touch screen strip and check.

Plug-in any other good Touch Screen and Check. This step is to verify whether the problem is in hardware or Nokia 305 touch screen is faulty.

If the problem is in hardware then clean touch on board connector and check.

Gently heat surrounding components of touch screen and check.

Re-solder each pin of touch connector and check.

If same problem check Touch screen track ways marked in below image

Nokia 305 Touch screen ways Problem Solution

If any Track ways is missing make a jumper with jumper wire.

If all track ways is working fine but touch screen is not working. This is the last and finnal step is Re-hot the red marked IC gently. Your problem will solved.

All the above methods will surely solve your problem, but make sure that you check the status of your Touch Screen after every step you perform, as it might be able to solve that problem.

Read More:-  Asha 310 Power On/Off Button Ways
Leave A Reply

Your email address will not be published.