Samsung I9500 Galaxy S4 Power Button Ways On/Off Key Jumper


Samsung Gt-I9500 Galaxy S4 Power Button Ways Problem Solution Jumper

This solution can be used as a remedy to repair a damaged power ON-OFF push button switch on Samsung Galaxy S4 I9500., most particularly on a damaged or lifted terminal solder pads on the PCB board. This solution may also only works if the phone shows charging indication when the battery charger is plug-in but unable to TURN ON while pressing the powerswitch button.

Just refer to the solution below and follow some step by step procedures on how to diagnose the power switch problem

Samsung GT-I9500 Power ON-OFF Switch Connection Tracks

Samsung Galaxy S4 GT I9500 Power Button Ways Key Jumper
samsung gt i9500 power key ways button jumper

Repair hints for Power Switch problem on Samsung I9500 Galaxy S4:
1. Check the power switch assembly, if the assembly is damaged replace the switch.
Sometimes even if the powerswitch is not not visually damaged, see to it that it still working by using a
2. For lifted button switch solder terminal pads on the PCB board, manage to re-establish the switch to its original position and bond it perfectly so that it won’t easily break. Then manage to reconnect the power switch line paths and the ground connection. If you can see an empty components solder pads just below of it,  you can connect it to that spot. that is also connected to the power switch.

Samsung I9500 Power Button Ways, Galaxy S4 On Off Key Jumper Solution, Set Is Dead Problem

Samsung GT-I9500 Power Button Jumper Solution, Repair Power Button Ways

Read More:-  Samsung Galaxy A5 SM-A510 Power On-Off Key Ways
Leave A Reply

Your email address will not be published.