Samsung Note 3 SM-N900 Charging Ways Jumper Problem Solution
Here’s the full solution for Samsung Galaxy Tab2 P5100 not charging problem such as charging paused by tempreture it shows no charging indication when a working charger is being plug-in.
The solution below shows the charging circuit of Samsung P51000 that holds and protect the device during charging operation. If these said circuit components get damaged it results to charging problem issues. These components were composed of a chip fuse, chip diode, filter coil and capacitor.
Just refer to the solution below to locate where these said components being mounted on Samsung Note 3 PCB board.
Samsung Gt-P5100 Charging Solution
If Its Usb Charging Flex Is Good..Rehot Or Replace Q700 (Mosfet) And U716 (Ic Battery) … If Its Broken Replace Both
See The Image Below:
Samsung Galaxy Tab 2 GT-P5100 Not Charging Solution
Samsung Tab 2 charging ways and jumper tracks
You may check each of the highlighted components above and replace if found damaged.
If the fuse and the diode were both okay, you may then proceed to check the corresponding connected components before it. There is a voltage regulator transistor just near to the battery terminal that is also holds the Samsung Tab 2 P-5100 charging circuit.
Samsung GT-P5100 Charging Ways,Charge Jumper, Charging problem Solution Charging Paused By Temperature Repair Problem Solution.
