Nokia 225 Power Button Ways Problem Jumper Power Key Track Line.
One of the most common issues that are found in Nokia 225 is its power button problem. The reason for this problem could be anything. This could either be due to water damage or just the basic wear and tear. In the case of basic wear and tear, power button losses its Springiness hence you need to press it harder than usual for it to make it work for you or it could either fail completely.
Besides that, a problem in power button might also cause your phone to restart at times, which becomes very much annoying and it troubles you to the masses.
In the following lines you will get to know about power button problems as well as their solutions:
Nokia 225 Problems
power button becomes stiff.
Power button becomes unresponsive.
Workaround
For Nokia 225 power button problem there is no work around method, however you can try using a pin and move it all around the Samsung S5282 power button, as this might be able to take away some stiffness from your power button.
Nokia 225 Power Switch Hardware Solution
Here is the hardware solution for Nokia 225 power button problem:
When it comes to hardware, the very first thing that you need to do is to re-solder power button strip and check its on-board connector for any loose contacts.
If the above method not working replace new power button strip.
Check power switch connection line paths accross to each components where it is being connected.
Nokia 225 power Switch Ways problem Repair Solution
If any of the on/off switch + or – track missing then make a jumper.
Note: Please note that even though every solution posted on our website is tested by one or more members of our team before posting, but still we do not take any responsibility for any damage it may cause to your cell phones. Use these repairing solutions at your own risk. Thank You.
Nokia 225 Power Button Jumper,Power Button Ways,On Off key Not Working Problem,On Off Key Jumper, Power Switch Problem,Repair Power Button Problem.
