Nokia 210 Keypad Way Problem Ic Jumper Solution-This solution covers for hardware level of repair for Nokia Asha 210 Keypad Problem and Also you will find Nokia 210 Keypad Ways and Jumpers information in the diagrams in this article.
Just see the solution preview below for it shows which components needs to be check and replace if the there is No Keypad Working on phone or Keypad problem of the Nokia 210 goes wrong.
This solution may help if you already done a software calibration method and tried replacing the Keypad membrane but the problem continues.
Do these solutions step by step.
This solution may help for a water or wet damaged and accidentally, heavily dropped phones.
The Problem occur because of faulty Keypad membrane or bad it’s connection to the Mobile Phone’s PCBA Motherboard.
You Can Use any cleaning liquid for this purpose like CTC or any other you prefer.
Please Note that we will edit these solutions or add new ones if found in this page at any time in the future.So feel free to come back any time on this page to stay up to date.
Ful Keypad Ways:
Hints to fix Nokia 210 Keypad Problem Repair Solution:
Check/clean the keypad PCB matrix.
Clean/replace the keypad membrane..
Then First Rehot Or Replace Keypad Ic Z2451 And Z2450
Second Change Or Heat N2450
Applying Too Much Heat Can Damage The Mother Board And Parts.It Also Can Be Harm For Your Skin.So Keep In Mind About Normal Heat Flow When Making It Dry.
Nokia Asha 210 Keypad Ic Solution,Keypad Not Working Problem, Jumper Ways ,Keypad Ic Location,Hang Solution.Full Keypad Ways