Samsung SM-G355H Touchscreen Problem Repair Ways Solution
If you are looking and having trouble finding where to put a jumper if the touchscreen pin connector is already gone or lifted due to water water damaged on Samsung Galaxy Core 2 SM-G355H. This solution might help you to ease out your hard time finding where to solder a jumper wire on it just to fix a touchscreen not working problem.
Let’s have a look at Samsung SM-G355H touch screen problem and its step by step solution.
Touch not responding
Touch screen not working.
G355H Touch screen Problem.
Here is the manual solution of Samsung Galaxy Core 2 SM-G355H touch screen problem:
Restart your phone and Check.
Factory Reset your phone (Make sure to Backup your entire data)
Here is the hardware solution of Samsung Galaxy Core 2 touch screen problem:
Unplug and plug touch screen strip and check.
Plug-in any other good Touch Screen and Check. This step is to verify whether the problem is in hardware or SM-G355H touch screen is faulty.
If the problem is in hardware then clean touch on board connector and check.
Gently heat surrounding components of touch screen and check.
Re-solder each pin of touch connector and check.
Solution Picture By d-artigo
Samsung Galaxy Core 2 SM-G355H Touch Screen Problem Repair Ways Solution,G355H Touchscreen Jumper,Not Working Ways Solution.
If any Track ways is missing make a jumper with jumper wire.
All the above methods will surely solve your problem, but make sure that you check the status of your Touch Screen after every step you perform, as it might be able to solve that problem.
If you have further Questions please leave a comment.
Note: Please note that even though every solution posted on our website is tested by one or more members of our team before posting, but still we do not take any responsibility for any damage it may cause to your cell phones. Use these repairing solutions at your own risk. Thank You.