Nokia 700 Lcd Light Problem Jumper Solution
Nokia 700 Display Solution Lcd Light Ways Problem Jumper
In Nokia, 700 LCD is connected the motherboard with a flex cable connector. If your Display is not working, you obviously have to check if a faulty LCD is not causing this problem. If the LCD is okay then check the LCD connector.
LCD connectors in Nokia 700 or any other mobile phones for that matter are a little fragile. They can get damaged because of many reasons. Most of the times, LCD connectors get damaged because of poorly connecting and disconnecting LCD or if your mobile phone get water damaged they can easily get rusted and as soon as you unplug the LCD they crack.
Replace the LCD connector if you think it’s damaged. I have also marked all of the Nokia Lumia 520 LCD connector jumper ways in the diagram below. Only make the jumper if the connection prints are damaged.
Here are Nokia 700 Display connector jumpers ways. Please study these diagrams very carefully before you start repairing.
Nokia 700 Rm-670 Display Solution
Try With The New Lcd
The First Checks Its Second Working Voltage At Pin Lcd 16-17-18-19 And 24
Rehot D1400 And D2800 (Open The Cover / Her Cans)
See Picture Below
Nokia 700 Display Ways, No Graphics On Lcd, Display Light Ways Lcd Ic Jumper Solution.
Please Note that we will edit these solutions or add new ones if found in this page at any time in the future. So feel free to come back anytime on this page to stay up to date.
If you have further questions please don’t hesitate to leave a comment.
Note: Every repairing solution posted here is tested by at least one member of our team. Use the information available here at Your Own Risk. We are not responsible if any harm comes to your device during the repairing process.