Samsung GT-S5310 Display Connecter Ways White Display Problem Jumper Solution
here’s the Samsung Galaxy Pocket Neo S5310 display connection line paths is case you are going to troubleshoot display problem such blank display, dark screen display, white screen (with tones), No backlight LED that is resulted from due to wet damaged or accidentally dropped issues bu the users.
Blank display on Samsung S5310.
Lines on Display screen.
Abnormal Colors on Samsung Galaxy Pocket Neo S5310 display screen.
Reasons of Problems
LCD screen of Samsung Galaxy Pocket Neo GT-S5310 has gone through some sort of physical damage (most of the time this is the case of Display problems in Samsung S5310).
LCD screen of phone or the phone itself might have encountered any kind of water damage.
Software is outdated.
Display connector might be loose, causing any of the above mentioned problems in your phone’s screens.
LCD might be faulty itself, and you need to change that in order to overcome this issue.
On-board connector might be water damaged or faulty.
Unplug, clean and re-plug display strip (along with connector).
If the above step fails then check with any other good working LCD screen.
Now Check Continuity between Display connector to the resistor compounds. if any of then is track missing then make a jumper.
If the above procedures doesn’t fix the problem the possible faulty is the main engine IC. Try to re-heat or rework it.
Samsung Galaxy Pocket Neo S5310 Blank Display Problem Solution,Ways,Jumper,Lcd Screen Solution,White Display Problem.
If you have further Questions please leave a comment.
Note: Please note that even though every solution posted on our website is tested by one or more members of our team before posting, but still we do not take any responsibility for any damage it may cause to your cell phones. Use these repairing solutions at your own risk. Thank You.