Samsung Galaxy Note 3 N900A Touch Screen Solution Ways
Samsung SM-N900A Touch Screen Connector Problem Jumper Solution Ways
This solution may help for hardware repair on Samsung Galaxy Note 3 LTE N900A with not working touch screen problem. If the touch screen digitizer is broken or cracked of your Samsung N900A, you may only need to replaced it with a new touch screen glass digitizer. Just look for Samsung SM-N900A disassembly guide to properly dismantle the phone.
This may help if the touch screen digitizer is not damaged or already been replaced but still it doesn’t respond. Try to check out the solution below and check the highlighted components, it is the basic parts where to check or replaced.
Check the touch screen panel assembly for possible damaged, cracked or broken. Check the touch screen flex cable, there is an IC mounted on it. managed to rework it.
If the touch screen still doesn’t work, check the pin connector, clean if oxidized. Check or replace the resistors coils and capacitors.
If you have any further Questions please leave a message.
Keep in mind:- The every solutions posted on Our website is well tested before by our specialist team, But still we do not take any responsibility for any damage it may cause to your cell phone. Use these repairing solutions at your own Risk, Thank you.
Samsung Galaxy Note 3 N900A Touch Screen, Touch Problem, Touch Solution,Touch Screen Ways,Touch Screen Jumpers
