Samsung Galaxy S3 Neo I9300I Charging Jumper Solution Ways

Samsung Galaxy S3 Neo I9300I Charging Jumper Solution Ways
Samsung GT-I9300I Charging Ways Solution Usb Jumper
In Samsung Galaxy S3 Neo I9300I USB cable connector is also used for charging the phone. Because of excessive use or any other reason USB connector can be damaged.

So if you are experiencing any charging problem or problem connecting your Samsung I9300I Charging Ways Solution Usb Jumper to your computer via USB cable then it is possible that your Samsung GT-I9300I charging connector is faulty. Replacing it with a new one is the only solution here. But if by any chance the USB connector prints are broken then you have to make the jumpers as shown in the diagram below.

Resolving Samsung Galaxy S3 Neo I9300I0 charging problem:
Normally Samsung I9300I charging problem is due to faulty charging connector, and in order to overcome that, all you have to do is to:
Remove Battery cover, Battery and C cover, then check charging connector’s pins
First Clean and remount all the pins of charging connector.
Put Battery in again and connect charger.

Then check the fuse and the and the diode, replace if found damaged.

If you have further questions please don’t hesitate to leave a comment.

Note: Every repairing solution posted here is tested by at least one member of our team. Use the information available here at Your Own Risk. We are not responsible if any harm comes to your device during the repairing process.

Samsung Galaxy S3 Neo I9300I Charging Solution Jumper Problem Ways No Charging Not Supported
Samsung GT-I9300I, Charging Problem, Charging Solution, Charging Jumpers, Charging Ways