Samsung GT-B5512 Charging Ways Solution Jumper

Samsung GT-B5512 Charging Ways Solution Jumper
Samsung Galaxy Y Pro Duos B5512 Charging Solution Jumper Problem Ways Charging Not Supported
Solution in this post is for Samsung Galaxy Y Pro Duos B5512 if ever encountered a not charging problem.
The solution below provides the connection line paths of the charging circuit.

To fix the problem, you may first ensure that the wall charger you are using is properly working and the battery is not totally drained. Continue by checking the charging pin connector or DC jack connector, visually check it for possible damaged. Clean the PCB board charging pads and battery connector. If the problem still occurs proceed to components troubleshooting.

First check the fuse if open or damaged, second check the diode if shorted. Check the resistor near the power IC. Re-solder or replace if damaged. Trace the VCHARGE (charging voltage) line paths and the ground of the charging pads.

If the procedures above doesn’t solved the charging problem, the possible faulty is the power IC. Rework or replace if necessary.

Please Note that we will edit these solutions or add new ones if found in this page at any time in the future. So feel free to come back any time on this page to stay up to date.

If you have further questions please don’t hesitate to leave a comment.

Note: Every repairing solution posted here is tested by at least one member of our team. Use the information available here at Your Own Risk. We are not responsible if any harm comes to your device during the repairing process.
Samsung Galaxy Y Pro Duos B5512 Charging,Solution,Jumper,Problem,Ways
Samsung GT-B5512 Charging Solution Jumper Problem Ways No Charging Not Supported