Samsung Galaxy S5 Display Light Problem Repair Solution Ic Ways Jumper
Here’s solution for Samsung Galaxy S5 in troubleshooting or repairing display light failure for both LCD and Display. The solution below shows the connection tracks of the Samsung Galaxy S5 light circuit connection. Just analyze how the connection flows and then you may get some hints where to start in troubleshooting.
If the newly installed LCD still shows the same problem, refer to the solution below and locate the highlighted components on the Samsung Galaxy S5 PCB motherboard. These components holds and control the Display LED backlights to work.
Please Note that we will edit these solutions or add new ones if found in this page at any time in the future. So feel free to come back any time on this page to stay up to date.
Check/ replace the highlighted components such as the filter coil, diode and transistors. Check the voltage 1.8V across the inductor coil.
If you have further questions please don’t hesitate to leave a comment.
Note: Every repairing solution posted here is tested by at least one member of our team. Use the information available here at Your Own Risk. We are not responsible if any harm comes to your device during the repairing process.
Samsung Galaxy S5,LCD Display Light, Display Light Problem, Display Light Solution, Display Light Jumpers,
Samsung Galaxy S5 Display Light Ways, White Display, Blinking Display, Blank Display, Keypad Light
