Samsung Galaxy A5 SM-A510 Power On-Off Key Waysn,
Samsung A510 Power On Off Key Jumper, Track, Ways
In this post we will explain solution for Samsung Galaxy A5 SM-A510FD power problem. So if your phone is jammed and not powering up at all this post can be really helpful to you.
Refer to the solution below to determine its connection line paths and connected components. In some cases like power switch terminal solder pads is lifted or the capacitor and resistor already been missing, you may need to use a microscope and sharp blade knife, then dig out the PCB layer where the capacitor or the resistor conductive connection and then manage to establish a solder connection on that spots.
The two upper or legs of the power switch is connected to the PCB’s ground lines.
The other two which is in lower is the power switch line paths, just locate the test spots as shown on the solution above where to apply a jumper to reconnect it connection.
If you have further questions please don’t hesitate to leave a comment.
Note: Every repairing solution posted here is tested by at least one member of our team. Use the information available here at Your Own Risk. We are not responsible if any harm comes to your device during the repairing process.
Samsung SM-A510,Power Button,Power Key,Power Switch,On Off Button, On Off Switch, Power Problem
