LG H540 Usb Charging Ways Solution
Here is the solution for Huawei Ascend G750 U10 Not Charging problem like there is No Charging indication shows on the display when the battery charger is being plug-in.
This problem is may caused by a faulty charger or a faulty components on Huawei Ascend G750 PCB board. This problem may sometimes happens if the device suffered wet or water damaged or just exist.
Huawei Ascend G750 smartphone was launched in May 2014. The phone comes with a 5.50-inch touchscreen display with a resolution of 720 pixels by 1280 pixels at a PPI of 267 pixels per inch.
The Huawei Ascend G750 is powered by 1.7GHz quad-core MediaTek MT6592 processor and it comes with 2GB of RAM. The phone packs 8GB of internal storage that can be expanded via a microSD card. As far as the cameras are concerned, the Huawei Ascend G750 packs a 13-megapixel primary camera on the rear and a 5-megapixel front shooter for selfies.
If this problem occurred, you may first check the USB pin connector for possible damage and then clean it if there is an oxidation build-ups found.
You may refer to the solution below and do have a check an test procedures on the highlighted components for further troubleshooting.
Please Note that we will edit these solutions or add new ones if found in this page at any time in the future. So feel free to come back any time on this page to stay up to date.
If you have further questions please don’t hesitate to leave a comment.
Note: Every repairing solution posted here is tested by at least one member of our team. Use the information available here at Your Own Risk. We are not responsible if any harm comes to your device during the repairing process.
Huawei Ascend G750Charging,Solution,Jumper,Problem,Ways
Huawei Ascend G750-U10 Charging Solution Jumper Problem Ways No Charging Not Supported