Samsung E1205 Network Problem Repair Jumper Solution
Samsung Galaxy Ace S5830 Network Problem Repair Ways Solution,
Samsung E1205 Signal Ways Solution Low Network Problem Jumper
Here’s a solution for Samsung GT-E1205I with a no network signal problem. this solution shows some repair hints on how to fix the device if such problem occurred.
If trying to fix this problem, you may first restore, flash, or update the device flash firmware. If the restoring or flashing doesn’t fix the signal problem. You may then proceed to hardware troubleshooting for check up procedures on some certain components on the PCB board. refer to the solution below for it shows the RF circuit of the Samsung E1205.
There is a very slim chance you will get this kind of problem but if it happens you should check the Signal Antenna and it’s Connector Pads are properly connected and there is no disturbance between them. Signal Antenna pads are placed on the back side of the motherboard. If by any chance you have damaged your Samsung E1205 Signal Antenna pads I have marked their jumper ways in this diagram. Please be very careful while making any hardware repairing.
Please Note that we will edit these solutions or add new ones if found in this page at any time in the future. So feel free to come back any time on this page to stay up to date.
If you have further questions please don’t hesitate to leave a comment.
Note: Every repairing solution posted here is tested by at least one member of our team. Use the information available here at Your Own Risk. We are not responsible if any harm comes to your device during the repairing process.
Samsung E1205 Network Jumper Ways Network Solution,Signal Weak Or Low Problem.