Motorola Moto G XT1032 Charging Ways Not Charging Problem Solution
In this post, we are going to fix Motorola Moto G XT1032 charging problem. Not charging problem or it shows no charging indication when the battery charger is plug-in. The solution below shows the charging connection line paths which can be used for easy troubleshooting or repair the Motorola Moto G XT1032 charging problem.
There may be several reasons behind this problem such as: faulty USB charging cable, loose connection in power, damaged or bent charging port on the phone, etc. So you need to check all of them one by one.
Before proceeding, ensure that the battery and the battery charger are in good working condition.
– Check all the components shown on the image below, you may start by checking the USB pin connector.
– Then the fuse, diode, capacitors and filter coil for possible open or short circuit.
– Trace each of the connection line paths from USB pins down to the components where it is directly connected.
Clean dust on charging connector, you can do that simply with the help of a brush.
If same problem replace charging connector and check.
If same problem Check charging connector ways.
If you have further Questions please leave a comment.
Keep in mind:- The every solutions posted on Our website is well tested before by our specialist team, But still we do not take any responsibility for any damage it may cause to your cell phone. Use these repairing solutions at your own Risk, Thank you.
Motorola XT1032 Charging,Jumper,Problem,Ways, solution
Motorola Moto G XT1032,Charging,Charging Problem,Charging Solution,Charging Jumpers,Charging Ways