Samsung E1272 Short Dead Problem Repair Solution


Samsung E1272 Short Dead Problem Repair Solution
Samsung GT-E1272 Short Solution, Set Dead Problem Phone Not Powering On Set Heating Vibrate Only

With article and troubleshooting guide solution for Samsung E1272 mobile full shorted problem
Problem: Without any load battery empty, Full shorted cell phone.

One of the biggest issues that anyone can encounter in his Samsung E1272 phone is the power problem. This is mainly because if your phone is encountering power problems then definitely you cannot do anything in this case, as your phone won’t even power ON, hence forcing you to fix this thing at the earliest, else your phone would be of no use to you or for anyone else. Normally it happens that the power problem has something to do with your battery or battery terminals, and if the battery is the cause of this problem than you will surely be very lucky, as you only need to change the battery to overcome this problem, and you don’t need to go into the phone’s hardware components.

Solution: Remove capacitor Or Change.

If your mobile phone is short, it can have various problems like it may not power on (dead), it may overheat (although it is normal in some models!), its battery may drain and discharge very fast, it may hang and freeze frequently, it may restart sometimes, etc. It is called short-circuit.
The most common reason is phone drenched or fallen in the water.
Handset overheating.
Trying to use an incompatible.
Faulty charger for charging Sparks.
smoke coming out of the handset due to any reason.

Read More:-  Samsung SM-G316H Volume Keys Problem Jumper Ways Solution

Samsung E1272 Short Dead Problem Repair Solution

Thanks for checking out this Solution. contents provide include – dozens of cell phone article additional, pictures, with hardware and software troubleshooting guides for you. Support us like and connect with this blog for latest newsletter.

Troubleshooting guide
If mobile fully shorted at the charger or overvoltage. First to do with this problem remove pa, please. This Solution is tested and I hope you will satisfied by this short article about fully shorted china mobiles.
Clean PCB.
Heat all board carefully.
Remove signal ic.
Change charging ic.
Remove USB.
Warning! During working on this trick if accidentally your handset may have dead or faulted we are not responsible for that please read our privacy policy.

Samsung E1272 Short Problem Repair Solution

Leave A Reply

Your email address will not be published.