Samsung Z1 Z130H Touch Screen Problem Repair Solution
If ever trying to fix Samsung Z1 Z130H Touch Screen failure issues and you’ll do replacing the touch plate module, trying to calibrate the touch screen setting but unresponsive and restoring, upgrading and flashing the device firmware but nothing happens, the problem still exist and the touch screen left unresponsive.
This sometimes happens if the device suffered due to a wet damaged, heavily dropped and any relateddamaged accidentally done by the user. In this case only a hardware repair may only help solved the problem.
This solution below show the Samsung Z1 Z130H PCB board components that holds and control the touch screen panel to work.
Here is the hardware solution of Samsung Z130H touch screen problem:
Unplug and plug touch screen strip and check.
Plug-in any other good Touch Screen and Check. This step is to verify whether the problem is in hardware or Samsung Z1 Z130H touch screen is faulty.
If the problem is in hardware then clean touch on board connector and check.
Gently heat surrounding components of touch screen and check.
Re-solder each pin of touch connector and check.
Samsung Z130H Touch Screen Ways Problem Jumper
Please Note that we will edit these solutions or add new ones if found in this page at any time in the future. So feel free to come back any time on this page to stay up to date.
If you have further questions please don’t hesitate to leave a comment.
Note: Every repairing solution posted here is tested by at least one member of our team. Use the information available here at Your Own Risk. We are not responsible if any harm comes to your device during the repairing process.
Samsung Z1 Z130H Touchscreen, Touch Problem, Touch Solution, Touch Screen Ways, Touch Screen Jumpers