MobileRdx
    Facebook Twitter Instagram
    MobileRdxMobileRdx
    • Hardware
      • Samsung
      • Xiaomi Hardware
      • Huawei Hardware
      • Oppo Hardware
      • Vivo Hardware
    • Box Setup
      • Miracle Box
      • Z3x Box Samsung Tool PRO
      • Easy Jtag Plus Box
      • UFI Box
      • Infinity CM2
    • GsmTools
    • Contact Us
    • Privacy Policy
    |
    MobileRdx
    Nokia

    Nokia 130 TA-1017 Display Light Ways Problem Solution

    By Mobile RdxSeptember 1, 2018

    If you are searching to know how to repair Nokia New phone (HMD Global Nokia 2018) then here is the one of new technique and Nokia 130 hardware repair tutorial and today I will show you how to repair Nokia 130 TA-1017 LCD light and this is the most easiest way to solve No LCD Light on the Nokia 130 phone.

    This solution below shows the Nokia 130 LCD display backlight components that hold and control for the LCD screen display backlight to glow. If one of these components may become faulty due to wet or water damaged it will result in LCD’s backlight failure.

    Hardware Solution

    To fix the dark screen display problem, you may first try to replace or install a new Display screen module, to easily confirm if the LCD’s backlight LED’s were still working or already damaged.
    You can also check the LED’s using the multimeter if you can manage without damaging the LCD flex connector.
    If the newly installed LCD still shows the same problem and the LED light doesn’t light up, refer to the solution below and locate the highlighted components on the PCB board.

    Nokia 130 TA-1017 LCD Screen Display Problem Solution:

    Nokia 130 TA 1017 Display Light Ways Problem Solution

    Here are some hints on how to troubleshoot the “Nokia 130 LCD display backlight not working problem”.
    ” Note: ensure that the Lcd is okay or try replacing it before proceeding”
    1. Check the LCD pin connector for possible damaged, resolder if necessary.
    2. Trace each of the LED + (positive and LED – (negative connection line paths down to the resistors where it is being connected.
    3. Check the connected resistor, replace if found damaged.

    Read More:-  Nokia 308 Battery Connecter Ways JumperSolution

    Check the pin connector assembly and ensure to clean it as well.
    Check the display filter resistors including the LCD supply voltage and trace the connection tracks to the LCD pin connector. Replace the damaged resistor or mind to reconnect if there is an open line path.

    If you have further questions please don’t hesitate to leave a comment.

    Note: Every repairing solution posted here is tested by at least one member of our team. Use the information available here at Your Own Risk. We are not responsible if any harm comes to your device during the repairing process.

    Related Posts

    Nokia 3.2 LCD Backlight Problem Solution | Display Light Ways

    Repair Nokia 6.1 Not Charging Problems | Charging Ways

    Nokia 105 TA-1174 Full Keypad Ways – Keypad Problem Repair Solution

    Add A Comment

    Leave A Reply Cancel Reply

    All Box Latest Setup
    UnlockTool V2023.09.01.0
    EFT Dongle V4.5.4 Setup
    Z3x Box Samsung Setup V45.14
    Hydra Tool Setup V5.7
    Miracle Box Latest Setup V3.43
    Infinity CM2 Latest Setup
    UMT Dongle Latest Setup
    Infinity-Box BEST NK2 v1.15 Setup
    Facebook Twitter Instagram Pinterest
    • About Us
    • Contact Us
    • Privacy Policy
    © 2023 MobileRdx. Made with ❤️ in India

    Type above and press Enter to search. Press Esc to cancel.