Samsung Galaxy Xcover 4 G390 Combination File [Bypass FRP Lock]

Download Free Samsung Galaxy Xcover 4 G390 Combination File To Bypass FRP Lock

Are you searching a Samsung Galaxy Xcover 4 G390 combination file to bypass Samsung frp lock? If yes then you have landed on right place. Go through the below download section and download Samsung Galaxy Xcover 4  combination file and flash it to enable usb debugging in frp locked Samsung SM-G390 android phone.

Samsung Galaxy Xcover 4 G390 Combination File Bypass FRP Lock

What Is Samsung Combination File?
Samsung combination files are pre-enabled usb debugging firmware ROM and combination files may be different for different Samsung devices according to their build number and region. So make sure you have download compatible Samsung combination file for your device. If you are sure, you have downloaded the correct combination file for your own frp locked Samsung device then go ahead and follow the combination file flashing procedure & unlock Samsung frp without any flash tool.

As we all know Samsung combination file or Samsung adb files comes with pre-enabled usb debugging and oem lock. So we can use combination files to unlock oem on frp locked Samsung’s phone. After unlock oem lock of the device, you are free to bypass Samsung factory rest protection lock by flashing Samsung firmware.

Download Links:

1. Samsung Galaxy Xcover 4 (SM-G390F)

2. Samsung Galaxy Xcover 4 (SM-G390W)

3. Samsung Galaxy Xcover 4 (SM-G390Y)

READ MORE:-  Fix the missing OEM Unlock button on the Samsung J7 Pro

How To Flash Samsung Galaxy Xcover 4 G390:

    • Backup your data (videos, photo, messages, contacts,…)
    • Extract (unzip) the firmware file
    • Download latest Odin tool
    • Extract Odin ZIP file
    • Open Odin
    • Reboot your phone in Download / Odin mode (make sure your device is off) with the following button combo: POWER + VOLUME DOWN + HOME BUTTON– Other options in case first option did not work or isn’t possible.
      – Option 2 VOLUME DOWN + VOLUME UP than USB cable
      – Option 3 POWER + VOLUME DOWN + VOLUME UP
      – Option 4 POWER + VOLUME DOWN + BIXBY
      – Option 5 (Note9) USB cable + VOLUME DOWN + BIXBY
    • Connect phone and wait until you get a blue sign in Odin
    • Add the firmwares file to Odin:
      – Add the BL_xxx file to BL
      – Add the AP_xxx file to AP (if firmware is a single file add to AP)
      – Add the CP_xxx file to CP
      – Add the CSC_xxx file to CSC
    • Add the PIT file to Odin: choose “Pit” tab, click “PIT” and open *.pit file (skip if flash stock firmware not include PIT file)
    • Click the start button, sit back and wait few minutes

How To Bypass FRP Lock From Samsung G390:

      1. Install driver: SAMSUNG_USB_Driver_for_Mobile_Phones.zip (15.3MB)
      2. Power off your phone and reboot to DOWNLOAD MODE (press Volume Down + Volume Up + Power, then press Volume Up to continue)
      3. Flash Combination rom by Odin 3.13.1
      4. Continue, go to Settings > Developer Options >turn on USB Debugging
      5. Back to home screen, open IME app, type *#0808# > choose DM + ACM + ADB and Reboot
      6. Install ADB driver: adbdriver.zip
      7. Download and extract ADB-FRP.rar > run FRP_addROM.bat
      8. Power off your phone and reboot to DOWNLOAD MODE, again
      9. Flash full rom by Odin. Select full enough 4 files:
        AP: select to AP_G390xxx
        BL: select to BL_G390xxx
        CP: select to CP_G390xxx
        CSC:select to HOME_CSC_G390xxx
      10. Finally, wait for Odin show up PASS, your phone will reboot and done
READ MORE:-  Download Xiaomi Poco F1 Flash File Firmware (Stock ROM)

You might also like

Leave A Reply

Your email address will not be published.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More

Share9
Tweet
Pin
+1
9 Shares