Vivo Z1 Test Point Boot Vivo Z1 Into EDL (9008) Mode


Vivo Z1 Test Point Boot Vivo Z1 Into EDL (9008) Mode

Methods To Enter EDL Vivo Z1 EDL (9008) Mode Solution Vivo Z1 Flashing Pattern Lock Remove

As you know on Vivo Z1 you will not able to enter to edl mode neither using edl USB Cable nor using the EDL command or options. So the question is how you can enter or boot to edl mode on Vivo Z1 ? and you are at right place to know and understand the complete process to use edl mode on Vivo Z1. To use edl mode on this model, you just need to identify the EDL test point on the motherboard of the phone, if you find the correct test point then just connect these 2 points and you are done, and the phone will now detect on your computer. Now you can easily flash the firmware on your Mi phone and also you can remove mi account of the phone.

Meizu officially locked the bootloader by reasoned to improve the security system. Of course not all devices, only the latest. The impact, we can no longer flash device through fastboot. Another method to flash Nokia phones is through EDL Mode. But there are still many Vivo Z1 users who do not know how to get a device into EDL Mode, the reason is enter EDL Mode is more complicated than going to Fastboot. Sometimes special tools are needed.

What is EDL Mode?

EDL stands for Emergency Download Mode. This mode is like an emergency door to transfer the Android operating system (stock ROM) from computer to EMMC via processor when your device is boot loop, hard brick, or dead boot. The EDL Mode feature is available on Qualcomm Snapdragon devices.

Read More:-  Samsung Galaxy M11 M115F Test Point | Reboot Into EDL Mode

Vivo Z1 Test Point EDL Mode:

Vivo Z1 Test Point Boot Vivo Z1 Into EDL 9008 Mode

A surface-mounted test point is basically a small wire loop designed as an attachment point for test probes on a circuit board containing surface-mount components. It is relatively small, about the same size as a standard chip capacitor package.

The location of test points on each type of phone will vary depending on the type of PCB. On Qualcomm phones generally provided test points to force the device into emergency download mode (9008).


Paper clip, Copper wire, Tweezers

Special screwdriver for opening hp

Mi PC Suite and Mi Flashtools (skip for the existing ones)

Rom Fastboot Redmi Note 7

USB cable Redmi Note 7

Operator SIM card

How To Enter Vivo Z1 EDL Mode:

Open Back Cover Vivo Z1 using SIM Used Operator and then use a screwdriver to open the bolt

When it is open, please remove the flexible battery label, then leave it for a few minutes and reconnect

You notice the two dots in the image below that are close together

Connect the other end of the USB cable to the computer and the other end of the USB cable to Vivo Z1

Run device manage> note the USB port, what Redmi Note 7 you are Qualcomm’s HS-USB Diagnostics 9008E, if yes you take Tweezers or copper wire then samsungkan to point Test Point that you have seen in the image just to change the Qualcomm HS- USB Diagnostics 9008

When it becomes a Qualcomm USB Port of HS-USB Diagnostics 9008 then you can Flashing Vivo Z1 you as usual

Wait for Flashing process is complete

Read More:-  Xiaomi Mi A1 Test Point - Xiaomi Mi A1 EDL Mode

Congratulations Vivo Z1 have recovered from the dead

Leave A Reply

Your email address will not be published.