Nokia 6 Test Point – Boot Nokia 6 Into EDL Mode


Today I will Show you How to enter Nokia 6 into Edl mod using Test point it help user to flash stock rom on Bricked Nokia 6, because there is no any other way available to boot Nokia into edl when device is bricked or if you want to remove pattern lock screen password.

EDL mode is a Qualcomm enabled feature, that is useful to unbrick device, unlock bootloader or modify protected device parameters. However, not all Qualcomm based device support it.

Why We Need Nokia 6 Test Point:

If you are newbie user then probably EDL mode may be new word for you. But if you are involved in rooting and flashing firmware then absolutely not.

In short, EDL mode is also known as emergency mode for mobile. Technically all the Huawei devices come with EDL mode option. If you want to install or update your own Nokia 6 phone then you have many options to flash new stock ROM on the device using Recovery Mode or using fastboot mode. Both methods have some limitations like Recovery ROM can be used only to update higher version and you can’t downgrade Huawei version.

Nokia 6 Test Point EDL Mode:

Nokia 6 Test Point Boot Nokia 6 Into EDL Mode

How To Boot Nokia 6 Into EDL Mode:

Power off the device if possible.

Open back cover of dead Nokia 6. [You may do Google to tear down Nokia 6.

[Be careful at the time of removing back cover of the device and make sure you are not going to damage any hardware of the device]

Once you are able to remove back cover, disconnect the batter connector first. Battery not required for EDL mode.

Read More:-  Xiaomi Mi 8 SE Test Point For Flashing - Mi 8 SE EDL (9008) Mode

Uses Of Nokia 6 Test Points

  • Install stock ROM on Nokia 6
  • Flash Nokia 6 without unlock bootloader. Bootloader unlocking permission not required.
  • Recovery dead Nokia 6 flashing firmware.
  • Install stock ROM easily, if the device is not able to boot into fastboot mode or device stuck on Huawei Logo.
Leave A Reply

Your email address will not be published.