Xiaomi Poco M3 Test Point | EDL 9008 Mode | Repair Dead Boot, Unbrick

0

In this tutorial we will show you how to boot Xiaomi Poco M3  into EDL mode 9008 using test points? Emergency downloading mode or 9008 mode is very important to unbrick Qualcomm Xiaomi Poco M3 mobile.

Emergency downloading mode or 9008 mode is very important to unbrick Qualcomm Xiaomi Poco M3 mobile. There may be a condition when your Android device was in boot loop condition or bricked, but the bootloader has not been still unlocked. This condition will force you to use the Test Point process. It would be not possible to unlock the bootloader because the device is boot looped or bricked.

If you happen to own an Android device running a Qualcomm processor chances are that your device supports Emergency Download Mode aka EDL Mode.EDL mode is a Qualcomm enabled feature, that is useful to unbrick device, unlock bootloader or modify protected device parameters. However, not all Qualcomm-based devices support it.

What Is Xiaomi Poco M3 Test Point Or  EDL Mode?

If you are a newbie user then probably EDL mode may be new word for you. But if you are involved in rooting and flashing firmware then absolutely not.

In short, EDL mode is also known as an emergency mode for mobile. Technically all the Xiaomi Redmi devices come with the EDL mode option. If you want to install or update your own Poco M3 phone then you have many options to flash new stock ROM on the device using Recovery Mode or using fastboot mode. Both methods have some limitations like Recovery ROM can be used only to update higher version and you can’t downgrade Xiaomi version.

Read More:-  Xiaomi Redmi 7A Test Point - EDL 9008 Mode

Xiaomi Poco M3 Test Post EDL 9008 Mode:

Find EDL MODE FOR Xiaomi Poco M3 Xiaomi Poco M3 Test Point   EDL 9008 Mode

Uses Of Xiaomi Poco M3o Test Point

  • Install stock ROM on Xiaomi Poco M3
  • Flash Xiaomi Poco M3o without unlocking the bootloader. Bootloader unlocking permission not required.
  • Recovery dead Xiaomi Poco M3 by flashing firmware.
  • Install stock ROM easily, if the device is not able to boot into fastboot mode or device stuck on Xiaomi Logo.

Other Ways to Enter EDL Mode on Xiaomi Poco M3

Follow the instruction below carefully to boot your device into EDL Mode (aka Emergency Download Mode)

Using Adb Mode

  • First, install ADB & Fastboot driver on PC and then turn on USB debugging on your phone.
  • Now connect your device with PC using USB Driver.
  • Then open a command window in PC and paste following commands and hit enter.
adb reboot edl
  • If any pop up appears on the phone screen then allow the ADB access.

Fastboot mode

  • Download ADB and Fastboot Tool and extract it in your PC (C:/ Drive)
  • Boot your device into the bootloader
  • Open the command window on your PC on the same folder extracted (ADB and Fastboot Tool)
  • now enter the command
    .\fastboot oem edl

Note: It’s just to understand that EDL mode flashing is a universal method for all XIaomi devices. But EDL booting process may be different for different devices. For some devices, you can use the EDL boot command but problem is that nowadays edl command doesn’t work for all the latest Xiaomi smartphones. So the test point is the easiest and perfect method to boot any Xiaomi phone into edl mode using test terminals.

Read More:-  Xiaomi Redmi Go Test Point For Flashing | EDL 9008 Mode
Leave A Reply

Your email address will not be published.