Vivo V11 Pro Test Point | Boot Vivo V11 Pro Into EDL (9008) Mode


Vivo V11 Pro Test Point | Boot Vivo V11 Pro Into EDL (9008) Mode

Methods To Enter EDL Vivo V11 Pro EDL (9008) Mode Solution Vivo V11 Pro Flashing Pattern Lock Remove

As you know on Vivo V11 Pro you will not able to enter to edl mode neither using edl USB Cable nor using the EDL command or options. So the question is how you can enter or boot to edl mode on Vivo V11 Pro ? and you are at right place to know and understand the complete process to use edl mode on Vivo V11 Pro. To use edl mode on this model, you just need to identify the EDL test point on the motherboard of the phone, if you find the correct test point then just connect these 2 points and you are done, and the phone will now detect on your computer. Now you can easily flash the firmware on your Vivo phone and also you can remove FRP lock and google account of the phone.

Vivo officially locked the bootloader by reasoned to improve the security system. Of course not all devices, only the latest. The impact, we can no longer flash device through fastboot. Another method to flash Nokia phones is through EDL Mode. But there are still many Vivo V11 Pro users who do not know how to get a device into EDL Mode, the reason is enter EDL Mode is more complicated than going to Fastboot. Sometimes special tools are needed.

What is EDL Mode?

EDL stands for Emergency Download Mode. This mode is like an emergency door to transfer the Android operating system (stock ROM) from computer to EMMC via processor when your device is boot loop, hard brick, or dead boot. The EDL Mode feature is available on Qualcomm Snapdragon devices.

Read More:-  Nokia 4.2 TA-1157 EDL Test Point – Boot Nokia 4.2 Into EDL 9008 Mode

Vivo V11 Pro Test Point EDL Mode:

Vivo V11 Pro Test Point

A surface-mounted test point is basically a small wire loop designed as an attachment point for test probes on a circuit board containing surface-mount components. It is relatively small, about the same size as a standard chip capacitor package.

The location of test points on each type of phone will vary depending on the type of PCB. On Qualcomm phones generally provided test points to force the device into emergency download mode (9008).


Paper clip, Copper wire, Tweezers

Special screwdriver for opening hp

Mi PC Suite and Mi Flashtools (skip for the existing ones)

Rom Vivo V11 Pro

USB cable Vivo V11 Pro

Operator SIM card

How To Enter Vivo V11 Pro EDL Mode:

Open Back Cover Vivo V11 Pro using SIM Used Operator and then use a screwdriver to open the bolt

When it is open, please remove the flexible battery label, then leave it for a few minutes and reconnect

You notice the two dots in the image below that are close together

Connect the other end of the USB cable to the computer and the other end of the USB cable to Vivo V11 Pro

Run device manage> note the USB port, what Vivo V11 Pro you are Qualcomm’s HS-USB Diagnostics 9008E, if yes you take Tweezers or copper wire then samsungkan to point Test Point that you have seen in the image just to change the Qualcomm HS- USB Diagnostics 9008

When it becomes a Qualcomm USB Port of HS-USB Diagnostics 9008 then you can FlashingVivo V11 Pro you as usual

Read More:-  Xiaomi Mi 6X Test Point Ways Boot Into EDL Mode 9008

Wait for Flashing process is complete

Congratulations Vivo V11 Pro have recovered from the dead

Leave A Reply

Your email address will not be published.