Nokia 105 RM-908 Mic Ways Mic Problem Jumper Solution

0

Nokia 105 RM-908 Mic Ways Mic Problem Jumper Solution

Nokia 105 RM-908 Mic Jumper Microphone Problem Mic Solution Mic Not Working Problem Repair Solution Microphone Ways

Hello guys! Welcome to another Nokia 105 RM-908 article. As customary in this blog, we bring you more Nokia 105 RM-908 issues and their respective solutions. We hope you’ll find this material informative.

If you are looking for solutions to your own #Mobile issue, you can contact us by using the link provided at the bottom of this page.

In Nokia 105 RM-908 microphone is soldered to the motherboard. The mic is responsible for sending your voice to the person on the other end of a phone call, recording sounds while making videos or simply using voice recording apps. So if the other person can’t listen to your voice during a phone call you are going to have to change the microphone with a new one.

Changing the Nokia 105 RM-908 mic can be a little tricky. It is soldered to the motherboard so if you remove it remember it’s placing position and put the new microphone the same way the old one was. If you have broken prints of the microphone connection points I have marked all of them in the diagram below.

Please Note that we will edit these solutions or add new ones if found on this page at any time in the future. So feel free to come back any time on this page to stay up to date.

Nokia 105 RM-908 Mic Ways:

Nokia 105 RM 908 Mic Ways Mic Problem Jumper Solution

How To Repair Nokia 105 RM-908 Mic Jumper ways

Nokia 105 RM-908 mic not working repairing helpful ways. As the above diagram above__there are two color lines for the missing mic pins direct jumper ways repairing. The red color like is marked as the mic + pinpoint jumper and the yellow color line can help for the negative pin jumper. Do the same job is required__FOR A *mic not working issue. Here are some tested, working and solved tricks to resolve Nokia 105 RM-908 Missing Mic problem solution.
  1. First you need to change the mic if that is faulted. To conform the faulted mic, you can test it by recording your voice or making a direct call at another cell phone.
  2. For the missing mic pins you can apply the two same jumper from mic to other/next pinpoints.
  3. Make sure! mic hole is open and there is no any dust, rust or carbon cause. If mic hole is closed, user can face the low voice issue during your calls.
READ MORE:-  Nokia 303 Insert Sim Solution

If you have any further Questions please leave a message. Keep in mind:v he every solution posted on Our website as well tested before by our specialist team, But still we do not take any responsibility for any damage it may cause to your cell phone. Use these repairing solutions at your own Risk, Thank you.

Leave a Reply

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. AcceptRead More