Xiaomi Redmi 7A Test Point – EDL 9008 Mode
Redmi 7A Pinout Test Points Boot Into Edl 9008 Mode
If you happen to own an Android device running a Qualcomm processor chances are that your device supports Emergency Download Mode aka EDL Mode.
EDL mode is a Qualcomm enabled feature, that is useful to unbrick device, unlock bootloader or modify protected device parameters. However, not all Qualcomm based device support it.
What Is Xiaomi Redmi 7A Test Point Or EDL Mode?
If you are newbie user then probably EDL mode may be new word for you. But if you are involved in rooting and flashing firmware then absolutely not.
In short, EDL mode is also known as emergency mode for mobile. Technically all the Huawei devices come with EDL mode option. If you want to install or update your own Vivo Y95 phone then you have many options to flash new stock ROM on the device using Recovery Mode or using fastboot mode. Both methods have some limitations like Recovery ROM can be used only to update higher version and you can’t downgrade Huawei version.
Xiaomi Redmi 7A Test Post EDL 9008 Mode:
Find EDL MODE FOR Xiaomi Redmi 7A (2019)
Power off the device if possible.
Open back cover of dead Xiaomi Redmi 7A. [You may do Google to tear down Xiaomi Redmi 7A.[Be careful at the time of removing back cover of the device and make sure you are not going to damage any hardware of the device]
Once you are able to remove back cover, disconnect the battery connector first. Battery not required for EDL mode.
Uses Of Xiaomi Redmi 7A Test Point
- Install stock ROM on Xiaomi Redmi 7A
- Flash Huawei Y9 without unlock the bootloader. Bootloader unlocking permission not required.
- Recovery dead Huawei Y9 by flashing firmware.
- Install stock ROM easily, if the device is not able to boot into fastboot mode or device stuck on Huawei Logo.