Xiaomi Redmi K20 EDL Mode PINOUT [Redmi K20 Test Points]


Xiaomi Redmi K20 EDL Mode PINOUT [Redmi K20 Test Points]

Here is the test point of Xiaomi Redmi K20 If you happen to own an Android device running a Qualcomm processor chances are that your device supports Emergency Download Mode aka EDL Mode.

Xiaomi Redmi K20  EDL mode is a Qualcomm enabled feature, that is useful to unbrick device, unlock bootloader or modify protected device parameters. However, not all Qualcomm based device support it.

What Is Redmi K20 EDL Mode?

If you are newbie user then probably EDL mode may be new word for you. But if you are involved in rooting and flashing firmware then absolutely not.

In short, EDL mode is also known as an emergency mode for mobile. Technically all the Xiaomi devices come with EDL mode option. If you want to install or update your own Xiaomi or Redmi phone then you have many options to flash new stock ROM on the device using Recovery Mode or using fastboot mode. Same as if the bootloader of the device is already unlocked then you may boot the device into fastboot mode and then can install stock rom using Mi flash tool easily. Both methods can be perform if the device is ON condition and you are able to access your device setting.

Just boot the device into EDL mode or emergency downloading mode and flash MIUI fastboot rom /firmware using Mi flash tool. It will fix the all existing errors or you can recovery your dead phone again.

It’s really must to understand that EDL mode flashing is an universal method for all Xiaomi and redmi devices. But EDL booting process may be different for different devices. For some devices, you can use EDL boot command but problem is that now a days edl command don’t work for all latest Xiaomi smartphones. So test point is the easiest and perfect method to boot any Xiaomi phone into edl mode using test terminals.

So now the point is that where is the Redmi K20 EDL mode PINOUT or EDL test points Remember this process is little bit technical. In our next post we will show you “how to flash firmware on Redmi K20 into edl mode?” This post is only to find the Redmi note 5 pro edl mode that can be use to flash fastboot rom using Mi flash tool.

Read More:-  Xiaomi Poco F4 Test Point | Reboot to EDL Mode 9008

Xiaomi Redmi K20 EDL Mode PINOUT [Redmi K20 Test Points]

How To Find Xiaomi Redmi K20 Text Point. Xiaomi Redmi K20 EDL Mode PINOUT Redmi K20 Test Points

  • Power off the device if possible.
  • Open back cover of dead Redmi K20. [You may do Google to tear down Xiaomi Redmi K20 at home]
[Be careful at the time of removing back cover of the device and make sure you are not going to damage any hardware of the device]
  • Once you are able to remove back cover, disconnect the batter connector first. Battery not required for EDL mode.
  • Now remove the black tape to visible the edl points of Redmi K20 as shown below.
  • Now EDL mode or Redmi K20 edl test points are in front of you. And you can use them to install firmware on Redmi K20 without unlock bootloader.

So friends this is all about Redmi note 5 pro emergency downloading mode or edl mode. Now you can find the  Redmi K20 test points easily.

1 Comment
  1. Jamie says

    Hi, great article. Can I ask, where are the test points for the K20 ‘Pro’ model. The board seems slightly different and I can’t find them.

Leave A Reply

Your email address will not be published.