Vivo V9 1723 Test Point – Remove FRP And Pattern Lock Using UMT Dongle

By Mobile Rdx Last updated Sep 15, 2019

Vivo V9 1723 Test Point – Remove FRP And Pattern Lock Using UMT Dongle

Here is the test point of Vivo V9 1723 If you happen to own an Android device running a Qualcomm processor chances are that your device supports Emergency Download Mode aka EDL Mode.

Vivo V9 EDL mode is a Qualcomm enabled feature, that is useful to unbrick device, unlock bootloader or modify protected device parameters. However, not all Qualcomm based device support it.

What Is Vivo V9 1723 EDL Mode?

If you are newbie user then probably EDL mode may be new word for you. But if you are involved in rooting and flashing firmware then absolutely not.

In short, EDL mode is also known as an emergency mode for mobile. Technically all the Vivo devices come with EDL mode option. If you want to install or update your own Vivo phone then you have many options to flash new stock ROM on the device using Recovery Mode or using fastboot mode. Same as if the bootloader of the device is already unlocked then you may boot the device into fastboot mode and then can install stock ROM using Vivo flash tool easily. Both methods can be performed if the device is ON condition and you are able to access your device setting.

Just boot the device into EDL mode or emergency downloading mode and flash MIUI fastboot rom /firmware using Mi flash tool. It will fix all existing errors or you can recovery your dead phone again.

Vivo V9 EDL Mode PINOUT [Vivo V9 1723 Test Points]

How To Find Vivo V9 Text Point.

Power off the device if possible.
Open back cover of dead Vivo V9. [You may do Google to tear down Vivo V9 1723 at home]

[Be careful at the time of removing back cover of the device and make sure you are not going to damage any hardware of the device]

Once you are able to remove back cover, disconnect the battery connector first. Battery not required for EDL mode.
Now EDL mode or Vivo V9 1723 edl test points are in front of you. And you can use them to install firmware on Vivo V9 1723 without unlock bootloader.

How To Remove Vivo V9 1723 Pattern and FRP Lock Using UMT Dongle:

Here are the screenshot of Vivo V9 1723 unlocking using umt dongle LOG’S:

Device: Vivo V9

Operation: Reset Locks (Vivo)

Checking for existing devices…Not Found

Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.

Some phones may need Special Boot Cable or TestPoint for EDL mode.

Found Port: Qualcomm HS-USB QDLoader 9008 (COM12)

Driver Info: Huawei Incorporated, qu_usb_serial.sys, 2.1.1.0

Connecting to phone…OK