Redmi 6A Touch Not Working Problem Solution Touch Ways

0

Redmi 6A Touch Ways Touch IC Jumper Touch Not Working Problem Jumper Ways Solution Touch Not Responding.

If ever trying to fix Redmi 6A Touch Screen failure issues and you’ll do replacing the touch plate module, trying to calibrate the touch screen setting but unresponsive and restoring, upgrading and flashing the device firmware but nothing happens, the problem still exists and the touch screen left unresponsive.

This sometimes happens if the device suffered due to a wet damaged, heavily dropped and any related damaged accidentally done by the user. In this case, only a hardware repair may only help solve the problem. This solution below shows the Redmi 6A PCB board components that hold and control the touch screen panel to work.

You might be confused as to where the problem of your Redmi 6A touch calibrator is coming from and finding it difficult on how to solve the problem. First of all, let’s try to see the possible areas or causes of this annoying problem that makes it impossible for you to use your Redmi 6A touch screen or calibrator for your task.

Possible Causes of Redmi 6A Touch Screen Problem

  • Broken or damaged touch screen
  • Rust from water damage
  • Disconnection from the touch screen socket or connector
  • A damaged or broken connecting path (open circuit)
  • A faulty or missing resistor, capacitor, IC (integrated circuit) etc
  • A bad firmware or operating system software files

Redmi 6A Touch Ways TouchProblem Solution:

Here is the hardware solution of Redmi 6A touch ways problem: Redmi 6A Touch Not Working Problem Solution Touch Ways Unplug and plug touch screen strip and check.

Read More:-  Xiaomi Redmi 1S Charging Ways Not Charging Problem Solution

Plug-in any other good Touch Screen and Check.

This step is to verify whether the problem is in hardware or Redmi 6A touch screen is faulty.

If the problem is in hardware then clean touch onboard connector and check.

Gently heat surrounding components of touch screen and check.

Re-solder each pin of the touch connector and check.

Redmi 6A Touch Screen Ways Problem Jumper

Please note that we will edit these solutions or add new ones if found on this page at any time in the future. So feel free to come back any time on this page to stay up to date.

If you have further questions please don’t hesitate to leave a comment.

Note: Every repairing solution posted here is tested by at least one member of our team. Use the information available here at Your Own Risk. We are not responsible if any harm comes to your device during the repairing process.

Leave a Reply